| |
EE-80 PRODUCT DATA SHEET
Data
Sheet | Product Application
GENERIC TYPE: AMINE CURED
100% SOLIDS EPOXY PRE-PRIME, PRIME
DESCRIPTION AND RECOMMENDED USES: ARCOR™ EE-80 is a
solvent free, very low viscosity epoxy designed as a penetrating
pre-primer. It is ideally suited for use on large metal surface
areas that hold the blast until an ARCOR™ or ARCOR™ coating
system is applied, or to increase adhesion of a coating system
to metal surfaces, in immersion service, that cannot be blasted
to an SSPC-SP5 cleanliness. For external metal structures ARCOR™
EE-80 will penetrate through rusty surface and cure to a tough,
water resistant coating. Excellent as a sealer or aged “white
rusted” zinc surfaces. Applies in one, thin, 1.5 mil coat.
FOR INDUSTRIAL USE ONLY
SPECIFICATION DATA
|
TEMPERATURE:
Immersion service
Max. 120ºF (49º); Spike to 140ºF (60ºC) 3 Hrs
Dry to 250 ºF (121ºC): Spike to 300ºF (149ºC) 3 Hrs
CHEMICAL RESISTANCE:
Water: Excellent
Alkalines: Good
Inorganic Acids: Good
Organic Acids: Fair
Organic Solvents: Fair
ABRASION: Good
FLEXIBILITY: Very Good
Excellent with fiberglass Mat; 1 oz/ft2 (.33 KG/M2)
FILM THICKNESS:
1.5 mils/coat (.04mm; 38 microns)
Immersion/Dry: 1 coat, 2 coats if very porous especially
on concrete.
APPLICATIONS:
Tanks, Pipe, Flooring, Structural
Steel, Petrochemical Tanks, Waste water tanks,
Sewer Pipes, Portable water, Salt Water, Waste
Water, Service/Cooling Water Systems.
SOLIDS BY VOLUME: 100%
VISCOSITY: 300-500 cps
POT LIFE: 4 hrs/Gal @ 77ºF (25ºC)
COLOR:
Clear/slight amber.
MIX RATIO: 2:1 by volume (Base:Activator)
100 gm: 50 gm by weight
SHELF LIFE: 5
years at 55-95ºF, (13-35ºC)
COVERAGE: 1070 ft² (100 M²)/gal (theoretical)
WEIGHT PER GALLON: 15.0 lbs (3.9 KG)
1 kg=50 cu.in.
ORDER INFORMATION: To place orders
and/or obtain pricing information contact:
ARCOR Epoxy Inc. PO Box 273
South Dennis, MA 02660
TEL: 800-878-9593; FAX: 888-878-9593 |
Manufacturer makes no warranty
either expressed or implied including warranties of
merchantability or fitness for a particular purpose for this
product. Under no circumstances will the manufacturer be liable
for incidental, consequential or other damages, breach of
warranty, strict liability, or any other theory arising out of use
of this product.
|
