|
Protective
Epoxy Systems for Tank Applications
TankGuard™ Protective epoxy systems from ARCOR® offer the ultimate in performance for a wide range of tank applications...
Crude
Oil, Fuel Oil, Gasoline, Acid, Caustic, Alcohol, Nuetralization,
Wastewater, Demin Water, Portable Water, Carbon Filter, FGD
Recycle.
TankGuard™
Systems from ARCOR:
Spray
able 100% Solids Novolac Epoxies, High Build to 100 Mils/Coat,
Flex Resistant, Abrasion Resistant, Carbon Steel, Stainless,
Concrete, Aluminum, Cure For Service in 12 Hrs.
ARCOR®
Products Used
for TankGuard™
EE-10
A high
functionality epoxy Novolac coating especially suited for
aggressive acid environments. EE-10 is suitable as a primer as
well as a topcoat. Excellent against 98% Sulfuric Acid.
EE-11
A
sprayable multipurpose coating suited for aggressive acid and
caustic service. Excellent at elevated temperatures to 300F
immersion. High abrasion resistance. Excellent flexibility makes
EE-11 ideal for large tank applications.
EE-80
Very low viscosity
epoxy penetrating pre-primer. Suited for use on large surface
areas to hold the blast until the coating system can applied, up
to 7 days. Increases adhesion to surfaces which cannot be blasted
to an SP5.
S-16
A
sprayable epoxy coating that meets the NSF Std. 61 for Potable
Water linings. Also complies with USDA and FDA standards for
incidental food contact. Performs in all water environments, mild
acids & caustics.
ARCTHANE®
A high
elongation, elastomeric, hybridized epoxy/urethane. Ideally suited
for expansion joint sealing and weld repair, and it is completely
compatible with epoxy coatings.
EE-92
A high
functionality epoxy Novolac rebuild material formulated for the
highest abrasion resistance. Excellent resistance to a wide array
of acids, solvents and alkalis. Service temperature to 450oF.
EE-95
Rebuilding
material for metals in immersion service. Ideally suited as a
restoration or cladding material for corrosion and abrasion
protection in highly aggressive environments. Can be applied to
500 mils without slump.
|
