|
Click on the Product
below to view Data Sheets, Product Application, and MSDS'.
ARCOR®
EE-99K-C
Repair burst pipes, tanks, pumps and the
like which contain liquids or gases.
ARCOR® EE-99K-C is a solvent free fast cure rebuilding epoxy for
high abrasion areas. EE-99K-C sets in 6 minutes and can get put in
service within 1 hour regardless of temperature.
ARCOR®
2213 Epoxy Stick
Repair burst pipes, tanks, pumps and the
like which contain liquids or gases.
ARCOR™ Epoxy Stick is a solvent free two-component, moisture
insensitive epoxy adhesive designed as an emergency repair or
bonding material for metals, glass, concrete, or wood. It is
corrosion resistant, steel reinforced and can be sanded & tooled.
ARCOR® EE-91
USDA / NSF / FDA
Flooring / Tanks / Pipe
EE-91 is a solvent free epoxy designed
particularly as a rebuilding material for metals in immersion
service. It is suited for use as a grout or crack repair on
concrete, or as a metal rebuild material in immersion. EE-91
can be applied up to 500 mils without slump. EE-91 is; NSF
Certified for Potable Water; USDA for Incidental Food Contact in
Meat & Poultry Production; FDA Guidline CFR 21 Section 175.300 listed for Repeated Food
Contact use.
ARCOR® EE-92
High Wear Metal Rebuld
ARCOR® EE-92 is a solvent free,
two-component rebuilding compound designed particularly as a
rebuilding/repair material for metals damaged by
corrosion/erosion, abrasion or cavitation. ARCOR® EE-92 is
non-sagging up to 1”, will not shrink when curing and has
excellent adhesion to all metal surfaces. ARCOR® EE-92 has
excellent resistance in a wide variety of chemical environments
and has heat resistance to 500şF.
ARCOR® EE-93
Pumps / Impellers / Propellers / Valves /
Hydro-Wheels / Pipe Elbows
ARCOR™ EE-93 is a solvent
free, two component rebuilding compound designed for high
abrasion, erosion and cavitation environments. EE-93 is a
Novoalc Epoxy filled with spherical cubic zirconium giving it
the highest level of chemical, heat and abrasion resistance
possible in an epoxy system. This self-wetting formulation can be
applied without a primer and can be leveled to a smooth finish
requiring no top coat minimizing application & turn-around time.
ARCOR® EE-94
Coal Crushers / Coal Chutes / Pumps /
Impellers / Propellers / Valves / Hydro-Wheels / Pipe Elbows.
ARCOR™ EE-94 is a solvent free, two
component rebuilding compound designed for high abrasion, erosion
and impact environments. EE-94 is a Novolac Epoxy filled with
ceramic beads giving it the highest level of chemical, heat and
abrasion resistance possible in an epoxy system. This self-wetting
formulation can be applied without a primer, can be applied at 1"
(1000 mils) on verticals and overheads and can be leveled to a
smooth finish requiring no topcoat dramatically minimizing
application & turn-around time.
ARCOR® EE-95
Condensers / Heat Exchangers / Circ. Piping / Pumps / Tank Linings
ARCOR® EE-95 is a solvent free, high
functionality epoxy Novolac designed particularly as a rebuilding
material for metals in immersion service. It is ideally suited as
a restoration or cladding
material for corrosion and abrasion protection of condensers and
heat exchangers. ARCOR® EE-95 can be applied up to 500 mils
without slump.
ARCOR® EE-97
Worn Shafts / Hydraulic Rams / Pumps / Valves / Impellers /
Propellers / Stripped Threads
ARCOR® EE-97 is a solvent free,
two-component, reinforced rebuilding compound which can be used to
repair any metal surface that has been damaged, cracked or worn.
ARCOR® EE-97 is non-sagging up to 200 mils, will not shrink when
curing, has excellent adhesion to all metal surfaces, is
machinable with carbide or high speed cutting tools and can be
drilled, tapped or sanded.
ARCOR®
EE-99
Emergency Repair & Bonding / 6- Minute Cure
ARCOR® EE-99 is a solvent free,
two-component, moisture insensitive epoxy adhesive designed as an
emergency repair or bonding material for metals, glass, concrete
or wood. ARCOR® EE-99 sets in six minutes and can be put into
service within one hour.
|
