Deairator Tank Repair
Case History #021
After many years of service, deairator tank needed to be restored due to severe metal loss caused by corrosion.
Surfaces were White Metal-blasted to remove all pitted corrosion. Primer coat of ARCOR™ S-20 White was hand-applied. An intermediate coat of ARCOR™ S-20 Fuschia was then applied, followed by a top coat of ARCOR™ S-20.
Unit was returned returned to service within 24 hours after completion.

Tank surface abrasive-blasted.

ARCOR S-20 applied over top-coat.

Completed ARCOR S-20 top-coat.