Concrete Aggregate Feed Screw
Case History #018 REV.04-97
Concrete aggregate feed screw veins were badly eroded from wear and needed to be rebuilt.
ARCOR™ applied a primer coat of ARCOR™ S-16. This particular installation only called for two coats of protective coating. Screw veins were top coated with ARCOR™ EE-92, veins only.
Equipment has been back in service for 5 years with no problems.
Abbrasive-blasted aggregate feed screw.
Hand applied ARCOR S-16 White.
Hand applied top-coat of ARCOR S-20.