
Deairator Tank Repair
Case History #021
After many years of service, deairator tank needed to be restored due to severe metal loss caused by corrosion. Surfaces were White Metal-blasted to remove all pitted corrosion. Primer coat of ARCOR™ S-20 White was hand-applied. An intermediate coat of ARCOR™ S-20 Fuchsia was then applied, followed by a top coat of ARCOR™ S-20. Unit was returned returned to service within 24 hours after completion. Tank surface abrasive-blasted. ARCOR S-20 applied over top-coat. Completed ARCOR S-20 top-coat.
Related Links:
ARCOR S-20
More Information:
Contact Us
Call Our Offices
Previous
Next